BC204 BALDOR 11AMP DC CHASSIS REGEN CONTROL

BC204: 1/50 – 3/4HP @ 115VAC – 50/60 Hz, 1.5HP @ 230VAC – 50/60 Hz KBMG-212D Is an ultra-compact, full-wave regenerative DC Drive capable of operating sub-fractional DC PM or Shunt motors in a bidirectional mode. 4-quadrant operation provides forward and reverse torque in both speed directions. Through a jumper selection, the motor can be controlled to rapidly "regenerate to stop" or to "coast to stop." Finger Safe Cover provides added protection from electrical shock. Our Auto Inhibit® circuit provides safe, smooth starting even during rapid cycling of the AC line. The over-speed Protect Circuit prevents failure of the power bridge in extreme overhauling conditions. Reliability of the KBMG DC Drive is further enhanced with the use of a high-speed current limit circuit and MOV transient protection. LED's, can be used for diagnostics, are provided for power on and motor overload. A rugged extruded aluminum heatsink ensures enhanced heat transfer that provides a higher control rating while maintaining lower operating SCR temperatures. Power connections to the KBMG are made via quick connect terminals, signal input connections are made via a removable barrier terminal block. Jumper Selectable Features Operation Mode: Speed, Torque AC Line Voltage (VAC – 50/60 Hz): 115, 230 DC Armature Voltage (VDC): 90, 180 Tach-generator Voltage (VDC/1000 RPM): 7, 50 DC Current Output Ranges (ADC): (1.7 – 10') Analog Input Voltage (VDC): 0 to ±10, 0 to ±15 Enable: Coast to Stop (CTS), Regenerate to Stop (RTS) Trimpot Adjustments Dead Band (DB) Response (RESP) IR Compensation (IR) Forward Current Limit (FCL) Reverse Current Limit (RCL) Maximum Speed (MAX) Forward Acceleration (FACC) Reverse Acceleration (RACC) LEDs Power On (PWR ON) Overload (OL) NOTE: Auxiliary Heat Sink (Part No. 9861) – Increases the control rating to 1 HP at 90 VDC and 2 HP at 180 VDC. Dimensions (L x W x H approx.): 7.0” x 6.3” x 1.9”.