KBPW-240D KB Electronics 7.5A NEMA4X PWM 115/230VAC Speed Control 8401

Rated up to 2HP with Full-Wave PWM Variable Speed Drive in a NEMA-4X / IP-65 is a 115/230VAC washdown and watertight enclosure. It is designed to operate 90 and 180 Volt Permanent Magnet and Shunt Wound DC motors.

KBPW-240D is designed to operate 90 and 180 Volt Permanent Magnet and Shunt Wound DC motors. Motor overload protection (I x t) will shut down control if the motor is overloaded for a predetermined amount of time. The exclusive Auto-Inhibit® circuit allows safe, smooth starting during rapid cycling of the AC line. The KBPW-240D Variable Speed DC Drive can be operated from a two or three wire start/stop circuit or can be started from the AC line. A set of dedicated normally open or normally closed relay contacts are provided, which are activated via the start/stop circuit. Main features of the KBPW-240D Variable Speed DC Drive include Speed or Torque modes. Standard front panel features of the KBPW-240D include diagnostic LEDs (for Power On, Stop and Overload), a Start/Stop Switch and a Main Speed Potentiometer. Other features include Barrier Terminal Blocks, adjustable trimpots, selectable jumpers and LEDs. The KBPW-240D Variable Speed DC Drive is available in black finish or white FDA approved finish.

Optional Features:

• Forward-Brake-Reverse Switch with hesitation feature (P/N 9339). Includes switch and prewired dynamic brake resistor.
• Run-Stop-Jog Switch (P/N 9340)
• Signal Isolator, KBSI-240D (P/N 9431)
• On/Off AC Line Switch (P/N 9341)
• White Case (FDA) (P/N 9342)
• Electronic Pot, KBEP-240D (P/N 9108)
• Anti Plug Reversing Module (P/N 9378)
• Auto/Manual Kit (P/N 9377)