5/32HP LEESON 16RPM TEFC P240 WASHDOWN PARALLEL GEARMOTOR M1145138.00

LEESON P240 Series Epoxy Washguard SUB-FHP Parallel Gearmotor is designed for extended life in applications requiring regular washdown or otherwise wet environments. Permanent split capacitor motors rated for 115/230VAC, 60/50HZ input.

Features:

• 5/8" Keyed output shaft, hardened steel
• White epoxy painted motors
• Interior components protected against corrosion
• Precision machined worm-type gearing, hardened steel
• Output shafts have needle bearings for high load capacities
• Ball bearings used in gear housing
• Shaft material coated with Teflon/Ceramic plating
• O-rings and gaskets used for sealing
• Sealed output shaft
• UL Listed and CSA Certified

Application Notes:

• Supplied with a continuous duty "run" capacitor included in conduit box
• These gearmotors are designed for mounting at any angle, but motor below the reducer (shaft up with motor below) should be avoided to prevent leakage of lubricant into the motor should the shaft seal fail.
• If these gearmotors are stalled, the motor's stall torque could exceed recommended full load torques causing gearhead damage, especially in ratios of 60:1 and higher. Provisions to limit the torque are recommended.
• Overhung load capacities shown are at the center of output shaft